Click for larger image
FREE SHIPPING, U.S. Ground, 48 cont. states only
Shop with confidence
Secure Shopping Guarantee
Shopping with us is safe & secure. All our products (except downloadable software) are backed up by a 30-day money-back guarantee.View our shopping policy
Digital Level and Angle Gauge
Finally, a digital angle gauge you can depend on! Unlike earlier technology cubes that drain batteries just sitting in a drawer, the new AccuMASTER uses a low-power MEMS sensor for utmost accuracy and extensive battery life.
What's more, the invertible display with extra bright, always-on backlight makes it far easier to see at every angle. IP54 protected from water and dust, it includes 2 long-life AAA batteries, protective case and a 2-Yr Warranty.
Accuracy, Versatility & Dependability...
With the AccuMASTER 2-in-1 Digital Level and Angle Gauge you can find true level and precisely check angles on saw blades, jointer fences, sharpening planes, drill press and band saw tables, bevels and many more precision tools. The strong magnetized base lets you attach directly to any metal surface – tables, blades and more.
IP54 Certified: protected from dust, water spray.
- Perfect angles for perfect cuts every time
- Built-in level function for the tightest of spots
- New MEMS sensor for better accuracy, longer battery life
- Large, bright Stayglow™ display stays on as long as you're using it
- Reversible display, Hold function, magnetic grip
- 2 year warranty and IP54 dust and water resistant
- Displays angle readings in degrees, IN/FT, mm/M, percent slope
The AccuMASTER Angle Gauge is great for pro and hobbyist woodworkers, cabinet makers, welders, fabricators, installation technicians or anyone who needs to find true level and precise angle settings. These are just some of the AccuMASTER's many uses:
- table saw blade angle
- band saw table tilt
- miter gauge settings
- finding the angle for a chair back or seat rake
- sharpening angles for tools
Stayglow™ backlit display stays on as long as you're using it. Set 0 function lets you set any angle to 0° as a reference point. Hold button holds an angle reading in the display.
Accuracy: ± 0.2°
Digital Display of Angle: ° (degrees), % (slope), In/Ft, mm/M (pitch)
Power: Two long-life AAA 1.5 volt batteries
Dimensions: 2.25" x 2.25" x 1.25" (57 x 57 x 32 mm)
Weight: 3.5 ounces (100 grams)
Warranty: 2 years
IP54 Certified: Protected from dust, water spray
2 long-life AAA batteries
Protective pouch with belt loop
|Where have you been?|
|User: Jerry J from Monticello,MN|
|This is going to save me a lot of time AND increase the accuracy of my cuts|
|Great little level!|
|User: George, Maintenance electrician of Solar Atmospheres of CA from Fontana, CA|
|Great little level with unlimited applications! I've used it to level pictures (drives the wife nuts!) check the slope of roofs, hang conduit level (the magnet is great!), Level machinery, and a lot more, and I've only had it 7 weeks! NO regrets, thanks, guys!|
|User: Gary Lindholm from Wasilla,AK|
|easy to use, found out my table was a bit off, and a square that i use a lot,get one!!|
|User: James Lapinski, President of Lapinski Contracting from Pittsburgh Pa|
|AccuMASTER 2- in - 1 Digital Angle Gauge|
|User: Lawrence from Park City, Kansas|
|I really like it, I like the 2 magnetic sides, the light is a welcome feature.. As far as I can tell it is extremely accurate.|
|User: Wayne Ruxton, Owner/Operator of Ruxton's Woodworking from Indian River, MI|
|Very useful and fast, has proven to be very accurate on all my angle cuts.|
|My new Go-to for sure!|
|User: Eric Romaine|
|I'm an owner of the Wixey angle gauge (the competition) and I've always loved it, except for the well-documented battery issues. Until I got this unit, I'd use the Wixey every time I needed to set and angle. Now that I have this, the Wixey is getting eBayed.|
This little guy from Calculated Industries takes all that is good from the Wixey, and then makes it better. Here's what makes it my new go-to when I need to set my angles on my table saw and my chop saw:
1. It uses standard-sized AAA batteries. Thank you! Now, even if the batteries do die, they'll be right there in my battery drawer.
2. The backlight stays on. This is another little thing that really makes a big difference.
3. The display flips when it's inverted. This makes it that much easier to read and adds to the over all user-friendliness.
Ultimately, if I were shopping for one now, this would be it just because of the battery alone. Such a great tool!
|User: Joey Kovaly, Owner of Branch Ranch Building Company from Humboldt County, CA|
|After owning this little unit for a few weeks I can confidently say it is a must have. I own much more expensive protractors and levels, but this angle guage picks up the slack where they lack. The zero out function is genius and necessary for onsite set-ups of your saws, and quick assurance of your shop saws. Although I received the gauge free of charge for my honest review of this product, I think it WELL WORTH the affordable price tag. Just be sure to tie a ribbon to the little black case, it's easy to misplace in a dim lit shop!|
|Digital Angle Guage|
|User: Jim Maenner, Pricipal of ERC Consulting LLC from Green Bay, WI|
|I tested this tool with other digital gauges and levels; it is dead-on accurate. I mainly use it to set tablesaw and mitersaw to exact bevel angles. Calibration is a snap and I like that it uses standard batteries, but the battery indicator is only visible for a second when the unit is turned on. This tool also works great for leveling appliances.|
|User: Kevin Hoke, electrician from Winchester Va|
|I have used this tool several times and it is amazing. It works really well for those of us who want near perfection!|
|7434 AccuMASTER Digital Angle Guage|
|User: Peter Kootchin, Professional Handyman from Grand Forks, BC Canada|
|CI provided me with the 7434 AccuMASTER Digital Angle Gauge for beta testing free of charge in exchange for an honest unbiased review.|
I am a professional handyman and avid woodworker. I honestly was not aware that a tool such as this existed. It easily trumped my "old" way of testing angles on my mitre and table saws. I took it to a meeting of my woodworkers' club and there it became obvious the digital concept of measuring angles has been available for some time. Although many didn't know it existed.
The back lighting and large numbers stand out as key differences to other models. Interestingly one of the club members shared an idea of making a hinge type angle cutting sled for the table saw allowing for a variety of angles set accurately with the AccuMASTER, brilliant!
I've not had the unit long enough to evaluate battery life but ideally they'll last a long time and not be dead when I need the tool.
The back light staying on when in use is vital. When working in tight hard to see corners its helpful not only to have the back light but to have it stay on, and to be able to press hold and move it to verify the reading.
As I use the AccuMASTER more I realize the many times I could have used the tool in the past and see how it will become a fall-back tool in the future.
|User: Tim from Arlington,MA|
|I received this gauge from CI free to test and rate.|
After using it on both my mitre and table saws for set up, I found other things to do with it as well.
It can check for level or give you an angle measurement.
My wife had me check some wall hung frames for level. Very easy with a bright readout.
Magnetic case was handy on the saws.
Overall, in the short time I have had the 7434, I can see many uses for this in a tech toolbox.
|User: Jon Soghomonian from Three Oaks, MI|
|After working with the Accumaster, I found the tool be a high quality angle finder , simply for the accuracy. I will use this tool not only in my shop, but also for numerous applications in my field works as well.|
|User: Daryl Hayes, Project Manager of Terra Designs, LLC from Spearfish, SD|
|After trying and working with the Model 7434 AccuMaster Digital Angle Gauge from Calculated Industries I found it to be very useful while finishing our last model home and for building our current model home. It really helped squaring up our table saw. Made it a breeze to get the blade square with the table. Used it on the miter saw also. No more guessing if the blade is square. Now we get sharp and accurate cuts on casing, base and crown. It worked great for installing post and spindles on the deck handrail and was also helpful for plumbing up interior walls. I taped it to an aluminum straight edge in order to make it work, but it did the job. Also used it to plumb and level windows. There, although somewhat cumbersome, I also found it helpful to use a straight edge on the larger windows. All in all it is a compact tool that can be used for multiple applications. The pouch it comes with easily fits on my belt and the tool is easy to handle and operate. After only a few days of use, this is what I have found it useful for. I expect that after using it for a longer period of time I will find many more uses for it.|
|Good product with many uses|
|User: Kevin Slatzer, Carpenter from Columbus Ohio|
|Received this product free for a beta test. Used the product to adjust my miters for casing and crown. I used a square before and this product made it easy to adjust. I also used it to set a countertop. I usually use a set of levels and I could get it perfect using both. Another simple use is setting appliances. Washer and dryer. So many uses still to come. I haven't had it long enough to know how the battery life is, but that has been a problem in the past with similar products.|
|AccuMaster Digital Angle Gauge is a good tool|
|User: Lee Smith, owner/ senior project designer of Smith Design from Tulsa, Ok|
|Compact, easy to read and operate. Tried it on several surfaces. The magnetic bottom is great, but might need a warning on the device to keep away from computers, software, and credit cards. Seem water tight. Nice carrying case. Instructions are clear.|
|Loving the light|
|User: David Snell, Owner of Snellswoodworking from Batavia, ohio|
|Comments: The Accumaster7434 digital angle gauge that I reviewed for a free test run was great. I put the Accumaster thru all the steps in the user’s guide and it worked fine. Spent the day using it in the shop on the table and bandsaw. Would have liked to do a side test with my Wixey gauge but the batteries were dead. I liked the gauge bar that shows on screen when you hit the zero mark. The hold button is a nice feature to have when you can’t see in hard to reach places. Took it to a very low light room where we are putting in cabinets, and the back light was a big help. I love it as a serious DIY woodworker . This Accumaster will get lots of work from my tool bag.|
|Not my Grandfathers protractor!|
|User: Grandpa America|
|As a ole timer in the woodworking industry (my qualifications below). I know how prudent it is to maintain accuracy. This is not only in set ups but in machine calibration. This compact device is loaded with digital features to do so wit its latest most modern MEM technology.|
This Magnetic Digital Level and Angle Finder / Inclinometer differs from several the others I have. First I like the brighter back light and large numbers.The back light stays lit for as long as you are using and auto shut off after 3 minutes when it detects no movement. It has an incline line on the display that tells you the direction of level. When it goes over 90 degrees the display rotates. One of the feature through MEMs technology is longer battery life even in storage so its dependable and always there for you. Pressing hold keeps the reading after removal. 2 in 1 means use the inclinometer to check relative angles between surfaces, but also works as a compact true digital level. It has a magnetic base with two small feet to raise it above debris. Uniquely many of the others do not have these features in one.
In our old shop my great grandfather had to use practicable such as protractors, squares, dial indicators or fixed ridgid angles. These devices were good but still requires a lot of test runs to make sure you got the exact angle. That doesn't mean I don't test run after using this but it is usually right on the first time. Not only because the digital attributes are very accurate but because of it's compact size allows you to get in between items like saw teeth. Size 2-1/4 x 2-1/4 x 1-1/4 inches.
The mode button will scroll you through various types of readings such as degrees, percentage, inch to foot or mm to meter pitch.
When I set a machine being level is critical. But not always perfect. This is a work around. The process is simple zero out the device to your work base then set the degrees to your angle whatever it be to the cutter. This process applies to most any stationary power tooling in shops, such as table saws, chop saws, band saws, shapers, joiners, steel mill work, etc.. But it doesn't stop there.. Welding is done often in the air, and angles are easy. just zero on the first piece attach the second, find the angle, tack weld, check and finishl weld. Checking is easy because like with a square the weld won't get in the way.You can even set up lay out tools such as a sliding t bevel.
To use as a level all you need to do on the angle gauge simply switch between relative angle and absolute level using the mode key, Then you can read in degrees, percentage, inch to foot or mm. to meter pitch.
I am a 4th Generation professional wood worker. I consult to large plants and have purchased machinery for these plants. I now pick this one to set or check relative angles between surfaces for machine set up calibration. I have this for use in my own shop at my home where I do some prototype work before reporting to the factory. I am a top Amazon reviewer and am considered an expert in this field. You can see more on me at Act1woodcrafters. I received ONLY a free sample for evaluation and unbiased review - It's just my true assessment.. I am simply doing this review for you hoping I can pass on some worthwhile information to my fellow woodcrafters.
|User: John Shriver, Owner Operator of The Grindersmen Saw and Tool from Williamsburg Pa|
|User: Charles Exner, Chief putz from Spring Valley, MN|
|The AccuMaster is a replacement for another brand unit. The features I appreciate most are; A level that can be calibrated and it's very easy to read with the large backlit display.|